A780L M2G+/A780L M2L+/A780L BIOS Manual
35
Memory Configuration
BIOS SETUP UTILITY
vxx.xx (C)Copyright 1985-200x, Amer ican Megatre nds, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
Memory Configuration
Bank Interleaving [ Auto]
Channel Interleaving [ XOR of Addre ss bit]
Enable Clock to All DIMMs [ Disabled]
MemClk Tristate C3/ATLVID [ Disabled]
Memory Hole Remapping [ Enabled]
DCT Unganged Mode [ Always]
Power Down Enable [ Disabled]
> ECC Configuration
Enable Bank Memory
Interleaving
T-Series
Bank Interleaving
Bank Interleaving is an advanced chipset technique used to improve memory
performance. Memory interleaving increases bandwidth by allowing simultaneous
access to more than one piece of memory.
Options: Auto (Default)
Channel Interleaving
This item allows you to control the DDR2 dual-channel function.
Options: XOR of Address bits [20:16, 6] (Default) / XOR of Address bits
[20:16, 9] / Address bits 6 / Address bits 12 / Disabled
Enable Clock to All DIMMs
This item determines whether the BIOS should actively reduce EMI
(Electromagnetic Interference) and reduce power consumption by turning off
unoccupied or inactive DIMM slots.
Options: Disabled (Default) / Enabled
MemClk Tristate C3/ATLVID
This item enables or disables the MemClk Tristate function in C3 Mode.
Options: Disabled (Default) / Enabled
To Next Page
Loading...
Need help?
General
