TA770 A2+ SE BIOS Manual
34
Memory Configuration
BIOS SETUP UTILITY
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
Memory Configuration
Bank Interleaving [Aut o]
Enable Clock to All DIMMs [Dis abled]
MemClk Tristate C3/ATLVID [Dis abled]
Memory Hole Remapping [Ena bled]
DCT Unganged Mode [Alw ays]
Power Down Enable [Ena bled]
Power Down Mode [Cha nnel]
> ECC Configuration
Enable Bank Memory
Interleaving
T-Series
Bank Interleaving
Bank Interleaving is an advanced chipset technique used to improve memory
performance. Memory interleaving increases bandwidth by allowing simultaneous
access to more than one piece of memory.
Options: Auto (Default)
Enable Clock to All DIMMs
This item determines whether the BIOS should actively reduce EMI
(Electromagnetic Interference) and reduce power consumption by turning off
unoccupied or inactive DIMM slots.
Options: Disabled (Default) / Enabled
MemClk Tristate C3/ATLVID
This item enables or disables the MemClk Tristate function in C3 Mode.
Options: Disabled (Default) / Enabled
Memory Hole Remapping
This item allows you to enable or disable the remapping of the overlapped PCI
memory above the total physical memory. Only 64-bit OS supports this function.
Options: Enabled (Default) / Disabled
To Next Page
Loading...
Need help?
General
