S19 Pro+ Hydro Server Installation
2. Setting up the Server
7.
On the control panel, click the IP Report button. Hold it down until it beeps (about 5 seconds).
The IP address will be displayed in a window on your computer screen.
8.
In your web browser, enter the IP address provided.
9.
Proceed to login using root for both the username and password.
10.
In the Protocol section, you can assign a Static IP address (optional).
11.
Enter the IP address, Subnet mask, gateway and DNS Server.
12.
Click “Save”.
13.
Click https://support.bitmain.com/hc/en-us/articles/360018950053 to learn more about gateway and DNS Server.
To Next Page
Loading...
Need help?
General
