EasyManuals Logo
Home>Black & Decker>Power Screwdriver>BDCS40G

Black & Decker BDCS40G User Manual

Black & Decker BDCS40G
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
TROUBLESHOOTING
Problem Possible Cause Possible Solution
Battery will not charge. Charger not plugged into Plug charger into a
a working outlet. working outlet. Refer to
“Important Charging
Notes” for more details.
Check current at
receptacle by plugging in
a lamp or other appliance.
Check to see if
receptacle is connected to
a light switch which turns
power off when you turn
out the lights.
Charger jack not fully plugged Check to be sure
into tool charging socket. charger plug is fully
inserted into tool
charging socket.
Unit does not operate. Motion control activator Ensure motion control
is not fully depressed. activator is fully pressed in.
For assistance with your product, visit our website www.blackanddecker.com for the location
of the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986.
ACCESSORIES
Recommendedaccessories for usewith your toolare availablefrom your local dealer orauthorized
service center. If you needassistance regardingaccessories, please call: 1-800-544-6986.
WARNING:The useofanyaccessorynotrecommended forusewith thistool couldbehazardous.
THE RBRC™ SEAL
The RBRC (Rechargeable Battery Recycling Corporation) Seal on the
lithium-ion battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have already been paid
by Black & Decker. In some areas, it is illegal to place spent lithium-ion
batteries in the trash or municipal solid waste stream and the RBRC
program provides an environmentally conscious alternative.
RBRC in cooperation with Black & Decker and other battery users, has
established programs in the United States and Canada to facilitate the collection of spent
lithium-ion batteries. Help protect our environment and conserve natural resources by
returning the tool to an authorized Black & Decker service center for recycling. You may
also contact your local recycling center for information on where to drop off the spent
battery, or call 1-800-8-BATTERY.
SERVICE INFORMATION
All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under
"Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com
FULL TWO-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in
material or workmanship. The defective product will be replaced or repaired at no charge
in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Black & Decker BDCS40G and is the answer not in the manual?

Black & Decker BDCS40G Specifications

General IconGeneral
BrandBlack & Decker
ModelBDCS40G
CategoryPower Screwdriver
LanguageEnglish

Related product manuals