off (Fig. K).
OPERATION
WARNING: Do not operate blower without blow tube or flexible collection tube securely in place. Never reach down
into housing through tube hole.
USE AS A BLOWER
WARNING: Always wear safety glasses. Wear a filter mask if the operation is dusty. use of rubber gloves and
substantial footwear is recommended when working outdoors. For household use only.
WARNING: Cut Hazard. When turning the tool off for tube installation or any other reason, wait 10 seconds for the
fan to stop rotating before disassembly.
Do not use in vacuum mode without the vacuum tubes and collection bag in place.
Always switch off and remove the plug from the electrical supply when:
Changing from blower to vacuum or back.
The power supply cord has become damaged or entangled.
You leave blower/vac unattended.
Clearing a blockage.
Checking, adjusting, cleaning or working on blower/vac.
Use blower/vac only in daylight or good artificial light.
Switching On/Off
WARNING: Use both hands to grip the product firmly when switching on.
CAUTION: Do not point unit discharge at self or bystanders.
WARNING: Cut Hazard. When turning the tool off for tube installation or any other reason, wait 10 seconds for the
fan to stop rotating before disassembly.
Your blower is fitted with a on/off switch located on the top of the power head handle 4 .
To switch the blower on, slide the on/off 2 switch forward as shown in Fig. L.
To switch the blower off, slide the on/off 2 switch back as shown in Fig. L.
To Next Page
Loading...
Need help?
General
