Black & Decker BPACT12WT User Manual

Page 13
CONTROL PANEL
SET UP & USE
Cool
Fan
Display Area
AUTO
LOW
MED
HIGH
Dehumidify
Heat
(Heat models BPACT12HWT
and BPACT14HWT only)
Mode Selection
Button
Fan Speed
Selection Button
Increase Temp
Button
ON/OFF
Decrease Temp
Button
Pictures are for illustration purpose only. Your model may or may not have all the features.
OPERATING FROM THE CONTROL PANEL
The Control Panel enables you to manage all the main functions of the appliance, but
to fully utilize its potential, you must use the remote control unit.
TURNING THE APPLIANCE ON
• Press the
button until the appliance turns on. The last function active when it was
turned o will appear.
• Never turn the air conditioner o by unplugging from the main power supply.
Always press the button
, then wait for a few minutes before unplugging. This
allows the appliance to perform a cycle of checks to verify operation.
NOTE: Before pressing the Power
button, make sure the condensate drain plug in
the rear of the unit is securely in place to avoid any leaking.
• Press the MODE button until the light corresponding to the required Mode lights
up.
*Heat models BPACT12HWT and BPACT14HWT only

Black & Decker BPACT12WT Specifications

General

Brand	Black & Decker
Model	BPACT12WT
Category	Air Conditioner
Language	English