6 of 7
11/14/2011
#21896
SW642A
SW644A: rear view
TECH SPECS
User Controls — All models: Keyboard commands; Mouse-click functions;
Wizard, Wizard PRO, Wizard MP, Wizard DVI: (1) front-mounted pushbutton
for channel change and configuration mode;
Wizard LP:
(1) top-mounted pushbutton for channel change and maintenance mode;
Wizard, Wizard MP only:
(1) bottom-mounted 8-position DIP switch for reset and firmware
upgrade;
Wizard
PRO
only: On-screen menu;
Wizard DVI only: (1) bottom-mounted 8-position DIP switch for bootup
autoswitching, reset, and firmware upgrade; optional Remote Control
Module for channel change; optional serial commands for channel change
and multichassis synchronization
Connectors —
Wizard, Wizard PRO, Wizard MP,
Wizard DVI: (1) rear-mounted barrel jack for optional
power-supply connection; (1) multipurpose DB15 F;
Wizard LP: (1) side-mounted barrel jack for optional
power-supply connection;
Wizard, Wizard PRO, Wizard LP:
User port:
(1) HD15 F for monitor attachment;
(2) 6-pin mini-DIN F for keyboard and mouse attachment;
CPU ports:
(2) on SW651A;
(4) on SW642A, SW644A, SW652A;
(8) on SW648A), each consisting of: (1) HD15 F for video port
attachment; (2) 6-pin mini-DIN F for keyboard port
and mouse port attachment;
Wizard MP:
User port:
(1) HD15 F for monito attachment;
(1) 8-pin mini-DIN F for Sun keyboard and mouse attachment;
(2) 6-pin mini-DIN F for PS/2 keyboard and mouse attachment;
(2) 3.5-mm stereo audio jacks: (1) for microphone
attachment, (1) for speaker or headphone attachment;
CPU ports: (4) DB25 F composite;
Wizard DVI:
User port:
(2) 6-pin mini-DIN F for keyboard and mouse attachment;
Molex DVI-D F for monitor attachment:
(1) on KV1002A-R2, KV1004A-R2;
(2) on KV1022A-R2, KV1024A-R2;
(4) on KV1044A-R2;
CPU ports ([2] on KV10x2A models; [4] on KV10x4A
models), each consisting of:
(2) 6-pin mini-DIN F for keyboard and mouse attachment;
Molex DVI-D F for video port attachment:
(1) on KV1002A-R2, KV1004A-R2;
(2) on KV1022A-R2, KV1024A-R2;
(4) on KV1044A-R2
Indicators — Wizard, Wizard PRO, Wizard MP, Wizard DVI: (1) front-mounted
7-segment status display;
Wizard LP: All top-mounted: (1) Power LED;
SW642A: (4) Port (Channel) LEDs
Enclosure — Wizard, Wizard MP, Wizard DVI: Steel, aluminum, and plastic;
Wizard LP, Wizard PRO: Steel and aluminum
Temperature Tolerance — 32 to 104°F (0 to 40°C)
Humidity Tolerance — 5 to 60%, noncondensing
Altitude (Maximum) — 10,000 ft. (3048 m)
Power —
All models except Dual- and Quad-Head Wizard DVI:
• 5 VDC at up to 500 mA from the keyboard interfaces of the attached
computers, or
• From the optional power supply PS649-R3 (not included): 100–240
VAC, 50–60 Hz from power outlet, through detachable power cord
and IEC 320 M inlet, to external transformer;
Dual- and Quad-Head Wizard DVI only: From power supply PS649-R3
(not included): 100–240 VAC, 50–60 Hz from power outlet, through
detachable power cord and IEC 320 M inlet, to external transformer
Size — Wizard, Wizard MP, Wizard DVI: 1.75"H (1U) x 10.3"W x 5.9"D
(4.4 x 26.2 x 15 cm);
Wizard LP: 1.1"H x 6.6"W x 4.8"D (2.8 x 16.8 x 12.2 cm);
Wizard PRO: 1.75"H (1U) x 17.1"W x 8.1"D (4.4 x 43.4 x 20.6 cm);
connectors protrude an additional 0.2" (0.5 cm) from the rear of the unit,
for a total depth of 8.3" (21.1 cm)
Weight — Wizard, Wizard MP, Wizard DVI: 2.2 lb. (1 kg);
Wizard LP: 1 lb. (0.5 kg);
Wizard PRO: 3.2 lb. (1.5 kg)
To Next Page
Loading...
Need help?
General