124
– “Status”
Press
/ to display the current selec-
tion: “not registered” if call forwarding
has not been activated or
“registered” (plus call forwarding
number) if call forwarding has been ac-
tivated.
–“Clear”
Call forwarding will be deleted immedi-
ately.
– “Register”
Enter the call forwarding number here
and press OK to confirm your selec-
tion.
Call forwarding will be registered.
– “Activate”
Call forwarding will be switched on.
– ”Deactivate”
Call forwarding will be switched off.
• Press
/ to make your selection and
press OK.
A practical example of call forwarding
Select the type of call forwarding you want
to use and whether it will apply to speech,
data or faxes.
All call forwarding can be activated in the
same way.
Example:
Forward all calls.
• Press
/ to select “All calls” and
press OK.
All service(s)
“Speech”
• Press
/ to select “Speech” and
press OK.
Activate
Deactivate
• Press / to select “Register” and
press OK.
• Enter the number you wish to forward
all calls to (press CL to correct if nec-
essary) and press OK again.
After a short waiting period you will see the
following display:
• Press / to display the call forward-
ing number to check it.
• Press OK.
• Press
/ to select “Activate” and
press OK.
You have activated the call forwarding func-
tion. All incoming calls will be automatically
forwarded to the number entered.
Programming with DSC – Call Menu
Helsinki gb2 12.06.2002, 10:49 Uhr124
To Next Page
Loading...
Need help?
General
