Blue Robotics BlueROV2 User Manual

of#40#
4#
Assembling the Center Panels
To assemble the center panels, you will need the following parts and tools:
• 2 x Enclosure Cradle (4” Series)
• 2 x Front center panels
• 2 x Rear center panels
• 1 x Threadlocker
• 1 x Bag with eight M4x18 socket head cap screws
• 1 x 3 mm hex key
1. Apply one drop of threadlocker to each of the eight M4x18 screws. Roll the screws
around on a paper towel to evenly spread the threadlocker and to remove excess
threadlocker.
2. Attach one of the Enclosure Cradle (4” Series) to the rear center panels. Tighten the
screws until they indent the rear center panels slightly.
3. Attach the other Enclosure Cradle (4” Series) to the front center panels. Tighten the
screws until they indent the front center panels slightly.

Blue Robotics BlueROV2 Specifications

General

Brand	Blue Robotics
Model	BlueROV2
Category	Robotics
Language	English