by Blum-Novotest 2012 39
EC Declaration of Incorporation
acc. to the EC Machine Regulations 2006/42/EC in the edition from 17 May.2006
We hereby confirm that the subsequently following components are defined for the installation into
other machines and that they are in accordance with the following safety requirements of the EC
regulations.
Commissioning is not allowed until it is ascertained that the machines, in which the components are
installed, are in accordance with the EC regulations 2006/42/EC.
The relevant technical information is compiled acc. to annex VII part B and, where appropriate, we will
send the information concerning the components to the different countries. The industrial property
rights of Blum-Novotest GmbH will remain unaffected.
Component name: P03.6000 / P03.6100/ P03.6200
P06.6300 / P06.6400 / P06.7600 /
Probe for workpiece measurement
Safety requirements
2006/42/EG, Annex I 1.5.1
Applied standards:
EC-Regulations: 2004/108/EG
2006/95/EG
1999/5/EG
Applied harmonized standards: EN61000-6
EN60204-1
EN ISO 12100
EN 300 328
EN 301 489-17
EN 60950-1:2001
Applied national standards: DIN VDE 0100
DIN VDE 0113
Authorised presentative for technical information: Blum-Novotest GmbH
Kaufstr. 14
88287 Gruenkraut, Germany
To Next Page
Loading...
Need help?
General
