BMC F2 User Manual

F2 Full Face Mask User Manual V2.1
8 / 14
English
Cleaning the Mask at Home
Notes:
 The mask and headgear can only be cleaned through hand
washing.
 The elbow, the swivel and the valve cannot be dissembled for
washing.
CAUTIONS
 Do not use solutions containing bleach, chlorine, alcohol,
aromatics, moisturizers, antibacterial agents, or scented oils to
clean any part of the system or air tubing. These solutions may
cause damage and reduce the life of the product.
 Exposing any part of the system or tubing to direct sunlight or
heat may cause deterioration.
 If any visible deterioration of a component is apparent (cracking,
crazing, tears etc), the component should be discarded and
replaced.
Daily / After Each Use
 Disassemble the mask components according to the
disassembly instructions.
 Thoroughly clean the separated mask components (excluding
headgear), by gently rubbing in warm (approx. 30°C) water
using mild soap.
 Use a soft bristle brush to clean the vent.
 Rinse all components well with drinking quality water and allow
to air dry out of direct sunlight.
 When all components are dry, reassemble according to th e
reassembly ins t ruc t ions.

BMC F2 Specifications

General

Brand	BMC
Model	F2
Category	Respiratory Product
Language	English