To Next Page

To Previous Page

F2 Full Face Mask User Manual V2.1

9 / 14

English

Weekly

Hand wash the headgear and all components in warm (approx. 30°C)

and soapy water. Use pure soap. Rinse the components well and

allow them to air dry out of direct sunlight.

Reprocessing the Mask between Patients

This mask should be reprocessed when used between patients.

Cleaning and disinfection instructions are available from the BMC

website, www.bmc-medical.com. If you do not have internet access,

please contact your BMC representative.

Reassembling the Mask

Install the forehead

pad onto the

upper-half installation

groove of the mask

frame.

Install the cushion

onto the lower-half

installation groove of

the mask frame and

confirm the proper

engagement

between the silicone

gel pad and the

installation groove.

Install the upper-half

headgear onto the

upper-half installation

hole of the mask frame.

Questions and Answers:

Need help?

Do you have a question about the BMC F2 and is the answer not in the manual?

BMC F2 Specifications

General