General Assembly Notes
and Warnings
Due to the high level of integration of the Roadmachine 01 Integrated Cockpit,
proper assembly requires a high degree of mechanical skill and specialized tools.
It is critical that the assembly and maintenance is performed by a qualified pro-
fessional.
In order to successfully assemble the Roadmachine 01 and the Integrated Cock-
pit it is important to follow the order of operations outlined in this guide. Failure
to follow the outlined procedure can result in an assembly process that is more
difficult than necessary and an end product that performs less than ideal.
WARNING: The Roadmachine 01 Integrated Cockpit (fork, stem, headset and
stack spacers) are all proprietary components that cannot be substituted with
non-specified components. Substitution of any of these components can com-
promise the integrity of the entire system and should under no circumstances be
substituted. Failure to follow this warning can result in serious injury or death.
2. Tools and materials
Allen keys: 3, 4, 5mm
Open-end wrench: 7, 8mm
Brand-specific hydraulic tools
High quality grease
Carbon paste
Torque wrench
Steerer tube cutting guide
Carbon fiber cutting blade
PF-86 BB Installation tool
ROADMACHINE - Integrated Cockpit System (ICS) Instruction Manual
1.
To Next Page
Loading...
Need help?
General
