On the road
Driving
Drive-ready state
Turning on the drive-ready state
1. Depress the brake pedal.
2. Press the Start/Stop button.
Turning off drive-ready state
Steptronic transmission:
1.
Engage selector lever position P with the
vehicle stopped.
2. Set the parking brake.
3. Press the Start/Stop button.
The engine is switched off.
Auto Start/Stop function
The Auto Start/Stop function switches the en-
gine off automatically while stationary to save
fuel. The engine starts automatically under the
following preconditions:
Steptronic transmission:
▷
By releasing the brake pedal.
▷ When Automatic Hold is activated: step on
the accelerator pedal.
Parking brake
Setting
Pull the switch.
The LED on the switch and the indicator
light in the instrument cluster are illuminated.
Releasing
With drive-ready state switched on:
Steptronic transmission: press the switch
while the brake is depressed or selector lever
position P is set.
The LED and the indicator light go out.
The parking brake is released.
Parking
Make sure the parking brake is engaged.
Steptronic transmission
Engaging selector lever position D, N,
R
▷ Gear position D.
▷ Neutral N.
▷ Reverse R.
To prevent the vehicle from creeping after
you select a gear position or reverse, main-
tain pressure on the brake pedal until you are
ready to drive off.
Engage selector lever position R only when the
vehicle is stationary.
Seite 24
QUICK REFERENCE
On the road
24
Online Edition for Part no. 01405A89334 - VI/23
To Next Page
Loading...
Need help?
General
