Replacing components
Vehicle features and options
This chapter describes all standard, country-
specific, and optional equipment offered with
the series. It also describes features and func-
tions that are not necessarily available in the
vehicle, e.g., due to the selected options or
country versions. This also applies to safety
functions and systems. When using these
functions and systems, the applicable laws
and regulations must be observed.
Onboard vehicle tool kit
Depending on the vehicle equipment, the on-
board vehicle tool kit is located:
▷ In the cargo area behind the left side trim
panel.
▷ Under the cargo floor panel.
Wiper blades
Safety information
NOTICE
The window may sustain damage if the wiper
falls onto it without the wiper blade installed.
There is a risk of damage to property. Hold
the wiper firmly when changing the wiper
blade. Do not fold in or switch on the wiper
without a wiper blade installed.
NOTICE
Folded-out wipers can be jammed when the
hood is opened. There is a risk of damage to
property. Make sure that the wipers with the
wiper blades mounted are folded down onto
the windshield before opening the hood.
Replacing the wiper blades
1.
To change the wiper blades, bring wipers
into fold-out position.
Fold-out position of the wipers, refer to
page 135.
2. Fold out and hold the wiper arm firmly.
3. Press the button, arrow 1, and turn the
wiper blade, arrow 2.
Seite 313
Replacing components
MOBILITY
313
Online Edition for Part no. 01405A89334 - VI/23
To Next Page
Loading...
Need help?
General
