201
EntertainmentReference At a glanceControlsDriving tipsCommunications NavigationMobility
Inserting mobile phone
1. Remove the protective cap from the mobile
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.
2. Push the mobile phone with the buttons
facing upward toward the electrical connec-
tions and press down until it engages.
The mobile phone battery is charged from the
radio readiness position.
To protect the vehicle's batteries, avoid
using the phone when the ignition is
switched off.<
Removing mobile phone
Press the button.
Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG
To Next Page
Loading...
Need help?
General
