Controls
79
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
Units of measure
You can change the units of measure for con-
sumption, distances, temperature and pres-
sure.
1. Select "Language / Units" and press the
controller.
2. Change to upper field if necessary. Turn the
controller until "Units" is selected and press
the controller.
3. Select the menu item to be set and press
the controller.
4. Select the desired unit of measure and
press the controller.
The settings are stored for the remote control
currently in use.
Language on Control Display
1. Select "Language / Units" and press the
controller.
2. Change to upper field if necessary. Turn the
controller until "Languages" is selected and
press the controller.
3. Select "Text language" and press the con-
troller. You can change the language of the
text displays.
4. Select and activate the desired language by
pressing the controller.
The setting is stored for the remote control cur-
rently in use.
Volume of warning tones*
On vehicles equipped with a single drive, you
can increase or decrease the volume of the
warning tones, e.g. for the safety belt reminder,
compared to the entertainment sound output.
The warning tones have a specified minimum
and maximum volume that cannot be dropped
below or exceeded.
1. Select "Tone / volume" and press the con-
troller.
2. Select "Volume settings" and press the
controller.
3. Change to the second field from the top if
necessary. Select "Warning tones" and
press the controller.
4. If necessary, change to the right-hand field
and turn the controller.
The setting is applied.
Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG
To Next Page
Loading...
Need help?
General
