Controls
83
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
Activating driver assistance functions
With backup camera switched on
iDrive, for explanation of concept, refer to
page 16.
1. Press the controller.
2. Select the desired function and press the
controller.
With backup camera switched off
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Vehicle / Tires" and press the con-
troller.
5. Change to upper field if necessary. Turn the
controller until "Maneuvering aids" is
selected and press the controller.
6. Select "Settings" and press the controller.
7. Select the desired functions and press the
controller.
You can also adjust the brightness of the
camera view.
The settings are used for the remote control
currently in use.
Displays
You can display the picture of the backup cam-
era in various ways.
In addition, you can also display the PDC Park
Distance Control, refer to page 81.
> "Camera view: full screen"
The picture of the backup camera is shown
on the entire Control Display.
> "Camera view: main window"
The picture of the backup camera is shown
in the main window of the Control Display.
> "PDC in main window only"
PDC is shown in the main window of the
Control Display.
Selecting displays
1. Select "Maneuvering aids" and press the
controller, refer to Activating functions.
2. Turn the controller until "View selection" is
selected and press the controller.
3. Select the desired display and press the
controller. The setting is used for the
remote control currently in use.
Cleaning backup camera
The lens of the backup camera is located in the
liftgate over the license plate.
The picture quality of the backup camera may
be impaired by dirt. Clean the lens with a moist,
non-abrasive cloth.
In case of frost, a heater in the lens is switched
on automatically.
Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG
To Next Page
Loading...
Need help?
General
