Everything under control
78
Settings and information
Operating principle
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 75
3 When the lights are on: instrument lighting
brightness 103
4 Calling up Check Control 83
5 Checking engine oil level 225
6 Setting the time 81
7 Setting the date 83
8 Viewing service requirement display 79
Exiting displays
The outside-temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
You can set units of measure.
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Language / Units" and press the
controller.
5. If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Units" is selected and press the con-
troller.
Online Edition for Part no. 01 41 0 014 258 - © 08/07 BMW AG
To Next Page
Loading...
Need help?
General
