Adaptive light control
Follow the general instructions on lamps and
bulbs, refer to page 236.
The illustration shows the left side of the engine
compartment.
55-watt bulb, H3
1. Open the folding cover in the engine com‐
partment.
2. Turn the cap and remove it.
3. Squeeze the holder together and guide it
downward.
4. Release the holder and fold it upward.
5. Remove the bulb and replace it.
6. Insert the new bulb and attach the cover in
the reverse order.
Parking lamps
Follow the general instructions on lamps and
bulbs, refer to page 236.
The illustration shows the left side of the engine
compartment.
35-watt bulb, H8
1. Open the folding cover in the engine com‐
partment.
2. Turn the cap and remove it.
3. Turn the bulb holder.
Turn in the other direction on the right side.
4. Remove the bulb and replace it.
5. Insert the new bulb and attach the cover in
the reverse order.
Seite 238
238
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
Replacing components
To Next Page
Loading...
Need help?
General
