▷ Confirming the selected display or set
values.
▷ Calling up computer information 73.
Symbol Function
With the lights switched on:
Dimming instrument lighting,
refer to page 87
Calling up Check Control, refer
to page 80
Checking the engine oil level,
refer to page 241
Setting the time, refer to
page 75
Setting date, refer to
page 76
Viewing service requirement
display, refer to page 78
Exiting displays
The external temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
The units for fuel consumption, route/distance,
temperature, and pressure can be changed.
1. "Settings"
2. "Language/Units"
3. Select the desired menu item.
4. Select the desired unit.
The settings are stored for the remote control
currently in use.
Clock
Setting the time
In the instrument cluster
To set the 12h/24h format, refer to Setting the
time format below.
1. Press button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa‐
nied by the time and the word "SET".
2. Press button 2.
Seite 75
Displays Controls
75
Online Edition for Part no. 01 40 2 957 353 - X/14
To Next Page
Loading...
Need help?
General
