Control Display
Brightness
Via iDrive:
1. "CAR"
2. "Settings"
3. "Displays"
4. "Control display"
5. "Brightness at night"
6. Turn the Controller until the desired bright‐
ness is obtained.
7. Press the Controller.
The setting is saved for the current driver profile.
Depending on the lighting conditions, the bright‐
ness adjustment may not be immediately appa‐
rent.
Resetting the vehicle
configuration
All individual settings can be reset to the factory
settings when the drive-ready state is switched
off.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Reset vehicle data"
5. "Reset vehicle data"
If the settings saved in a driver profile are
synchronised with a ConnectedDrive account,
these settings will be retained in the Connected‐
Drive account.
Seite 72
CONTROLS
General settings
72
Online Edition for Part no. xxx - VI/19
To Next Page
Loading...
