9
Immobiliser
2
Deactivation
Deactivating the immobi-
liser with the remote con-
trol unit
The immobiliser is deactivated
• by pressing button 2 on the
remote control unit once (if
the immobiliser was activated
automatically beforehand
when you switched off the
ignition, it is reactivated
30 seconds later).
Deactivation is confirmed
• by the turn indicators flashing
once
and
• by the alarm tone sounding
once, if programmed (
b 26)
If confirmation takes the form of
the alarm tone sounding four
times, this is to indicate that the
voltage in the on-board elec-
tricity supply has dropped
below a predefined threshold.
In this case, recharge the
motorcycle's starter battery
(
b Rider's Manual).
Deactivating the immobi-
liser without the remote
control unit
The procedure is the same as
that for deactivating the alarm
function without the remote
control unit (
b 15).
1 2
DWA_5_2_eng.book Seite 9 Dienstag, 1. März 2005 4:59 16
To Next Page
Loading...
Need help?
General
