28
Programming
6
Exiting programming mode
L Note:
Note that you cannot activate
the function for priming the
alarm automatically when the
ignition is switched off unless
the system is also set up for au-
tomatic activation of the immo-
biliser.
Programming mode is
cancelled
• by switching off the ignition
before the final step is com-
pleted
or
• automatically if more than
30 seconds are allowed to
elapse between any two con-
secutive steps in the pro-
gramming routine.
Programming is saved
• by switching off the ignition
after the final step is com-
pleted
or
• automatically 10 seconds
after completion of the final
step
Four acknowledgement tones
sound to indicate that you have
exited the programming func-
tion.
Your custom settings are not
saved if programming is
aborted.
DWA_5_2_eng.book Seite 28 Dienstag, 1. März 2005 4:59 16
To Next Page
Loading...
Need help?
General
