2
9
Alarm function
Alarm
Triggering the alarm
The alarm can by triggered
• by the motion sensor
• by an attempt to switch on the
ignition with an unauthorised
key
• by disconnection of the anti-
theft alarm from the motorcy-
cle's battery (the anti-theft
alarm's internal battery cuts in
to supply power)
Alarm
An alarm lasts for 26 seconds.
The alarm is active again
12 seconds later. You can can-
cel an alarm at any time after it
has been triggered by pressing
button 2 on your remote control
unit. This function does not
change the status of the anti-
theft alarm.
An acoustic alarm sounds and
the turn indicators flash for the
duration of the alarm. You can
program the sound of the
acoustic alarm (
b 15).
1 2
10DWAbkg3.book Seite 9 Mittwoch, 22. Februar 2006 12:53 12
To Next Page
Loading...
Need help?
General
