18
E46 Models
Power Distribution
The battery is installed in the trunk of the E46 and features lead/calcium plate material for
true maintenance free operation. The water usage of this battery is low throughout its ser-
vice life.
The Battery Safety Terminal is installed at the positive terminal of the battery. A repair kit is
available for the BST.
The E46 is produced with a vehicle specific wiring harness. This harness is based on the
ordered optional equipment of the vehicle so that it contains the proper connectors and
connections. Options can not be added at a later time without replacing the entire harness.
Specific kits are available to repair the harness in the event of an accident or damage to the
harness. These repair kits include:
• Engine compartment
• Vehicle’s rear area
If the entire harness need to be replaced, a new harness with the maximum equipment or
options must be ordered. This is the only harness that will be stocked in the parts system.
To Next Page
Loading...
Need help?
General
