21
E46 Models
Front Camber Adjustment
The top of the strut is mounted through elongated holes. The strut is fixed in position when
the vehicle is assembled. If minor corrections need to be made to the front end alignment,
the pin can be driven down and the strut can be moved in the slots to adjust the camber.
Approximately .5
o
of adjustment is available by moving the strut in the slots.
Follow the instructions for
making the Camber adjust-
ment described in Repair
Manual 32 00 610.
Use Special Tool 32 3 140
to make the adjustment.
To Next Page
Loading...
Need help?
General
