Front wheel stand
Use
A front-wheel stand for simple,
safe changing of the front wheel
is available from BMW Motor-
rad. The front wheel stand with
the BMW special tool number
36 3 970 can be obtained from
your authorized BMW Motorrad
retailer.
The BMW Motorrad front
wheel stand is not designed
for holding motorcycles without a
center or other auxiliary stands. A
motorcycle standing on the front
wheel stand and the rear wheel
alone can fall over.
Place the motorcycle on the cen-
ter stand or an auxiliary stand
before lifting it with the BMW
Motorrad front wheel stand.
Mounting front wheel
stand
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing rear-wheel stand
( 103)
with OE Center stand:
Place motorcycle onto center
stand.
Loosen adjusting screws 1.
Push two mounts 2 far enough
apart that front forks fit be-
tween them.
Use locating pins 3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
Align two mounts 2 so that
front forks rest securely on
them.
Tighten adjusting screws 1.
8
102
z
Maintenance
To Next Page
Loading...
Need help?
General
