▷ When passing buses or trucks with a speed
sticker.
▷ If the traffic signs are non-conforming.
▷ During calibration of the camera immediately
after vehicle delivery.
▷ When signs that are valid for a parallel road
are detected.
Selection lists
General information
Depending on your vehicle's equipment, the fol‐
lowing can be displayed or operated using the
buttons and the thumbwheel on the steering
wheel as well as the displays in the instrument
cluster and the Head-up Display:
▷ Current audio source.
▷ Redial phone feature.
▷ Turn on voice activation system.
It also displays programs of the Driving Dynamics
Control.
Activating a list and adjusting the
setting
On the right side of the steering wheel, turn the
thumbwheel to activate the corresponding list.
1.
Turn the thumbwheel and select the desired
setting.
2. Press the thumbwheel.
Display
Depending on the equipment version, the list in
the instrument cluster may differ from the illus‐
tration.
Onboard Computer
Concept
The Onboard Computer displays different vehi‐
cle data in the instrument cluster, such as aver‐
age values.
Calling up information on the Info
Display
Press and hold button on signal lever.
Information is displayed in the Info Display of the
instrument cluster. Pressing the button repeat‐
edly displays additional information.
Information at a glance
Repeatedly pressing the button on the turn sig‐
nal lever calls up the following information in the
Info Display:
Seite 128
CONTROLS
Displays
128
Online Edition for Part no. 01402989296 - II/18
To Next Page
Loading...
Need help?
General
