Selecting a mirror
To change over to the other mirror:
Slide the switch.
Adjusting electrically
Press button.
The mirror movement follows the button
movement.
Malfunction
In case of an electrical malfunction, adjust the
mirror by pressing the edges of the mirror glass.
Folding in and out
NOTE
Depending on the vehicle width, the vehicle
can be damaged in vehicle washes. There is a
risk of damage to property. Before washing,
fold in the mirrors by hand or with the button.
Press button.
Folding is only possible up to a speed of approx.
15 mph/20 km/h.
Folding the mirrors in and out is helpful in the fol‐
lowing situations:
▷ In vehicle washes.
▷ On narrow roads.
Mirrors that were folded in are folded out auto‐
matically at a speed of approx. 25 mph/40 km/h.
Automatic heating
Both exterior mirrors are automatically heated
whenever drive-ready state is switched on.
Automatic dimming feature
Both exterior mirrors are automatically dimmed.
Photocells in the interior mirror are used to con‐
trol this.
Automatic Curb Monitor, exterior
mirror
Concept
If reverse gear is engaged, the mirror glass on
the front passenger side is tilted downward. This
improves your view of the curb and other low-ly‐
ing obstacles when parking, for instance.
Activating
1.
Slide the switch to the driver's side
mirror position.
2. Engage selector lever position R.
Deactivating
Slide the switch to the passenger's side
mirror position.
Interior mirror, manually dimmable
Flip lever
To reduce the blinding effect of the interior mir‐
ror, flip the lever forward.
Seite 93
Seats, mirrors, and steering wheel
CONTROLS
93
Online Edition for Part no. 01402989296 - II/18
To Next Page
Loading...
Need help?
General
