165n
Index Data Technology Repairs Car care Controls Overview
Repairing a flat tire, M roadster, M coupe
12 Then unscrew the clear hose (4)
from the tire valve. Screw the valve
cap back onto the valve.
13 Place the clear hose (4) in the plas-
tic bag and store the M Mobility
System in the luggage compart-
ment.
Following use of the M Mobility
System, resume driving for a dis-
tance of at least 1.2 miles (2 km) so that
the sealant will be distributed uniformly
in the tire. Drive at a speed of at least
15 mph (20 km/h), but do not exceed
35 mph (60 km/h). Finally, check and
correct the tire inflation pressure as
soon as possible (at the nearest filling
station, for example). Refer to page 29.
If the tire does not retain inflation pres-
sure, do not continue driving. Consult
the nearest BMW center or tire dealer.<
Replace the defective tire as soon as
possible and have the new wheel/tire
balanced. Have the M Mobility System
refilled.
For this, please consult the nearest
BMW center.
Please note that the sealant bottle of
the system must be replaced every
three years by your BMW center if the
device is not used.
You will find corresponding instructions
for the use of the M Mobility System on
the device.
To Next Page
Loading...
Need help?
General
