EasyManua.ls Logo

BMW M3 2002 - Fuel Specifications; Tire Inflation Pressures

BMW M3 2002
151 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24n
Fuel specifications Tire inflation pressures
Refuel with lead-free
The engine uses lead-free gasoline
only.
Required fuel:
> Premium Unleaded Gasoline,
min. 91 AKI
AKI = Anti Knock Index
Never use leaded fuel, as it would
cause permanent and irreversible
damage to the oxygen sensor and the
catalytic converter.<
The specified inflation pressures are
provided on a sticker attached to the
B-pillar and visible with the driver's
door open.
Check tire pressures
On the next page you will find all the tire
pressure and ambient air temperature
specifications stated in the units usually
used in your country (psi; kilopascal).
After correcting the tire inflation pres-
sure, reinitialize the Flat Tire Monitor so
that it can monitor the tire inflation
pressure, refer to page 77.
Check the tire pressures on a
regular basis – at least twice a
month – and before every extended
journey. Incorrect tire pressure can
otherwise lead to driving instability, tire
damage and accidents.<
Comply with tire approval
specifications
The inflation pressures apply to BMW
approved tire sizes and tire manufac-
turers. Your BMW center is familiar with
these pressures. Higher pressures may
be specified for tires made by other
manufacturers.
Your vehicle is equipped with tires that
not only meet US standards, but also
European standards. We recommend
the exclusive use of BMW approved
tires.

Table of Contents

Related product manuals