45n
OverviewControlsMaintenanceRepairsDataIndex
Entering the rear Safety belts
Unlocking backrest
Pull up on the lever and push the back-
rest toward the front.
The outer levers hold the safety belt to
enable it to be reached more easily.
Lock both backrests while driving,
otherwise there is a danger of an
unexpected movement causing an
accident.<
Drive with your safety belt on
Always fasten your safety belt before
starting off. As supplemental restraint
devices, the airbags are designed to
enhance the effectiveness of the safety
belts, and not to replace them.
To fasten
Make sure you hear the catch engage in
the belt buckle.
To release
1. Press red button in the belt buckle
2. Hold the belt
3. Guide belt back into the inertia reel.
In the rear, the belt buckle with
the word "CENTER" is provided
exclusively for the passenger sitting in
the middle.<
Safety belt height adjustment
Use the height adjustment mechanism
to adapt the safety belt to the ideal
position for your own body:
1. Press the button
2. Slide the entire assembly up or
down.
Also observe the instructions on
adjusting the seats on page 42.
To Next Page
Loading...
Need help?
General
