69n
OverviewControlsMaintenanceRepairsDataIndex
Cruise control
To decelerate
Press button (–) briefly:
When cruise control is active, every tap
of the button reduces the speed by
approx. 0.6 mph (1 km/h).
Press and hold button (–):
With the cruise control active, the
system automatically reduces the
throttle opening to slow the vehicle.
When you release the button, the
system maintains and stores the
current speed.
To interrupt the cruise control
When the system is activated, press the
button. The indicator lamp stays on.
You can use the cruise control again
whenever you want by calling up the
speed that was stored last.
In addition, cruise control is interrupted
automatically:
> When the brakes are applied
> When pressing down the clutch pedal
> If you exceed or fall below the
programmed speed for an extended
period (by depressing the acceler-
ator, for example)
> When shifting in the sequential mode,
refer to sequential M gearbox
*
SMG II on page 59.
To recall the stored speed
Press button:
The vehicle accelerates to and main-
tains the last speed stored.
To Next Page
Loading...
Need help?
General
