47
N62 Engine
Flywheel
The lightweight flywheel is made from a laminated plate. The
starter ring gear is also the increment wheel for engine speed
and crankshaft positioning/misfire detection.
The ring gear is riveted directly to the flexplate (6). The fly-
wheel diameter is 320 mm.
Vibration Damper
The vibration damper is a torsional vibration absorber (axial
design). The outer edge of the damper has a notch (1) to
accept the locating tool when positioning the crankshaft for
initial setting.
The locating tool inserts into the raised mount in the front
cover (2).
RReeffeerr ttoo tthhee RReeppaaiirr IInnssttrruuccttiioonnss ffoorr tthhee pprrooppeerr
eennggiinnee ttiimmiinngg pprroocceedduurree..
Engine Mounting
The engine is secured by two hydraulic damping mounts that are located on the front axle
carrier (structure and function are the same as the E38/M62).
NNootteess::
12
To Next Page
Loading...
Need help?
General
