33
54
Starting – Riding – Parking
e Caution:
Exceeding the specified engine
speeds while running in will lead
to increased engine wear.
L Note:
While running in the motor-
cycle, vary the throttle opening
and engine-speed range fre-
quently.
Try to do most of your riding
during this initial period on
twisting, fairly hilly roads rather
than high-speed main roads
and highways.
Running-in engine speeds
From 0 to 1,000 km (600 miles)
• Engine speed max.
4,000 rpm and no full-load
acceleration
• Do not omit the first inspec-
tion after 1,000 km
(600 miles).
Make an appointment with
your authorised BMW motor-
cycle dealer in good time, so
that the work can be per-
formed punctually.
From 1,000 to 2,000 km (600 to
1,200 miles)
• Engine speeds can be gradu-
ally increased after 1,000 km
(600 miles)
• Avoid lengthy periods at full
load until 2,000 km
(1,200 miles) have been
covered
Running in
10r28FUNbkg1.book Seite 54 Dienstag, 24. Januar 2006 9:31 09
To Next Page
Loading...
Need help?
General
