BMW R 1150 RT User Manual

13
General information and controls
1
A
B
C
2
Adjusting seat height

When installing the dualseat,
make sure that it is firmly located.
• Take off the front section of
the seat
• Lift up seat holder 2, position it
to suit the rider's size and
engage it in the chosen position
There are three rider's seat
height positions:
A = high B = center C = low
Locking the seats

When installing the dualseat,
make sure that it is firmly located.
• Push the rider's seat into its
catch
• Slide the rear section of the
seat into the guide and press
lightly to lock it into the seat
holder
Dualseat
10r22bku3.book Seite 13 Freitag, 27. Januar 2006 1:22 13

BMW R 1150 RT Specifications

General

Displacement	1130 cc
Transmission	5-speed
Final Drive	Shaft
Bore x Stroke	101 mm x 70.5 mm
Compression Ratio	10.3:1
ABS	Optional
Engine Type	Air/oil-cooled, four-stroke, Boxer twin
Power	95 hp at 7, 250 rpm
Torque	100 Nm at 5, 500 rpm
Dry Weight	259 kg
Front Suspension	Telelever
Rear Suspension	Paralever
Front Brakes	Dual disc
Rear Brakes	Single disc
Wheelbase	1485 mm (58.5 in)