downwards at the rear until the
locking mechanism audibly en-
gages.
NOTICE
To remove and install seat with
optional equipment, see the vehi-
cle rider's manual.
Frame guard
Installing the frame guard
Requirement
The frame guard is not installed
upon vehicle handover.
Requirement
The adhesive points must be dry
and free of both dust and grease.
Pull off protective films inwards
from foam strips 1.
Attach frame guard 2 and
press against adhesive points.
Install rubber bands 1. Posi-
tion the fastening points on the
inside of the frame in order to
avoid the rubber bands open-
ing when kicked.
Install frame guard on the op-
posite side in the same way.
Windshield
Adjusting the windshield
WARNING
Adjusting the windshield
while driving
Accident hazard
Only adjust the windshield
when the motorcycle is
stationary.
4
15
z
Operation
To Next Page
Loading...
Need help?
General
