Clutch fluid level (visual
check)
Clutch fluid level must not
drop.
If fluid level drops:
Unsuitable hydraulic fluids
could cause damage to the
clutch system.
No fluids may be poured in.
Have the defect corrected as
soon as possible by a special-
ized workshop, preferably an
authorized BMW Motorrad re-
tailer.
Tires
Checking tire tread depth
The handling of your mo-
torcycle can already change
for the worse before the legally
prescribed minimum tread depth
is reached.
Have tires replaced even be-
fore the minimum tread depth
is reached.
Make sure ground is level and
firm and park motorcycle.
Measure tire tread depth in
main tread grooves with wear
indicating marks.
Tires have wear indicators
integrated into the main
tread grooves. If the tire tread
has worn down to the level of
the marks, the tire is completely
worn. The locations of the marks
are indicated on the edge of the
tire, e.g. by the letters TI, TWI or
by an arrow.
When the minimum tread depth
is reached:
Replace tires concerned.
Rims
Visual inspection
Make sure ground is level and
firm and park motorcycle.
Visually inspect rims for de-
fects.
Have damaged rims checked
and, if necessary, replaced by
a specialized workshop, prefer-
ably an authorized BMW Mo-
torrad retailer.
Wheels
Tire recommendation
For every size of tire, BMW Mo-
torrad has tested and approved
certain makes as roadworthy.
BMW Motorrad cannot evaluate
the suitability of other tires, and
can therefore take no responsibil-
ity for their driving safety.
8
100
z
Maintenance
ProCarManuals.com
To Next Page
Need help?
General
