Install screw 3.
Install cover 2 with 3 screws 1.
Installing seat ( 61)
Replacing front/rear turn
indicator bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove screw 1.
Pull glass on screw connection
side out of mirror housing.
Remove bulb 2 from
light housing by turning it
counterclockwise.
8
116
z
Maintenance
ProCarManuals.com
To Next Page
Loading...
Need help?
General
