13
General information and controls
1
A
B
C
2
Adjusting seat height
When installing the dualseat,
make sure that it is firmly located.
• Take off the front section of
the seat
• Lift up seat holder 2, position it
to suit the rider's size and
engage it in the chosen position
There are three rider's seat
height positions:
A = high B = center C = low
Locking the seats
When installing the dualseat,
make sure that it is firmly located.
• Push the rider's seat into its
catch
• Slide the rear section of the
seat into the guide and press
lightly to lock it into the seat
holder
Dualseat
10r22bku3.book Seite 13 Freitag, 27. Januar 2006 1:22 13
To Next Page
Loading...
