2
3
1
EN
8 BATTERY AND CHARGING
INSTRUCTIONS.
8.1 Intended use.
Warning: The integrated battery pack is designed and
LQWHQGHGIRUXVHLQWKH%0:8UEDQ(%LNHRQO\
The battery pack has been designed in perfect integration with the
bike. This smart integration allows smooth lines and clean transitions
between the different bike areas. The battery can be easily removed
for charging, storage, transport and cleaning.
8.2 Assembly.
Insertion and removal of the battery pack.
Always switch off the battery pack before placing it into or removing
it from the bracket.
To insert the battery, slide it up along the down tube until the battery
front is inserted in its location (1). Then push the battery down until
it is perfectly inserted in its position (2). Lock the battery using the
key lock on the left side of the bike (3).
To remove the battery, proceed in reverse order. First unlock the
EDWWHU\SXOOWKHEDWWHU\XSIURPLWVORZHUHQGDQG³QDOO\VOLGHLWGRZQ
slightly and extract.
8.3 First use.
&KHFNWKHEDWWHU\SDFNEHIRUHXVLQJLWIRUWKH³UVWWLPH
The battery pack is partially charged when delivered (approx. 30%).
To guarantee the full performance of the battery pack, make sure to
charge it completely with the battery charger before it is used for the
³UVWWLPH
8VHRQO\WKHFKDUJHUVXSSOLHGZLWK\RXUHELNH7KHEDWWHU\SDFN
can be charged separately or on the e-bike.
Only charge the battery pack in compliance with all safety
instructions.
Warning: Check mains voltage. The voltage of the power
source must correspond to the details on the type plate of the
battery charger.
To Next Page
Loading...
Need help?
General
