My Z stepper motor wobbles excessively
Ensure the aluminum helical coupler has space left between the helical cut to help with misalignment.
The coupler can be stretched a total of 1 millimeter or 1/16” to help increase the gap between the
helical cut.
My machine seems to be skipping some commands
UGS has a built-in function that can skip text. If you seeing errors when running g-code files check to add
or delete the list of commands UGS is skipping. The below dialog box is found in the menu Machine>>
Options. Please click each of the items on the list and then click the “remove selected” button until the
test box is empty.
To Next Page
Loading...
Need help?
General
