Bogen Enhancer User Manual

Specifications
BCWR Receiver:
Mode Infrared Frequency Modulated
Receiving channels Dual-Channels A & B
Carrier frequency Ch.A: 2.0 MHz; Ch. B: 2.6 MHz
Audio frequency response 60 Hz-12 kHz
S/N ratio > 90 dB
Audio Mix Output 400 mV
Range (line-of-sight) Up to 30 ft.
Controls Power ON/OFF (front); Ch.A and B Volume (rear)
Connectors IR Sensor Coaxial-type Jacks (rear); Ch.A/B
AC Power input jack (rear)
Audio Mixed output RCA-type Jack (rear)
Power Requirements 16V AC, 600mA
Power consumption 8W
Dimensions (W x H x D) 10.6" x 2" x 7.4"
Weight 4 lb.
BCWBT Body-Pack Transmitter:
Carrier frequency Ch.A: 2.0 MHz; Ch. B: 2.6 MHz
Audio input BCLM Lavaliere-type Omni-directional Condenser
BCHM Headset-type Uni-directional Condenser
Controls ON/OFF Switch,Volume Control, Ch.A/B Select
Switch
Connectors 3.5 mm Locking Jack (MIC connection); DC Input
Charge Jack
Power Requirements 2 AA Batteries (2.4V DC)
Optional Rechargeable Battery Pack BCBRBP*
Optional Battery Charger BCBRA*
Dimensions (W x H x D) 2.6" x 3.9" x 1.7"
Weight (Transmitter) 3.6 oz.
Weight (Headset) 1.1 oz.
BCWHT Handheld Microphone Transmitter:
Carrier frequency Ch. B: 2.0 MHz
Audio Input Uni-directional Dynamic Cartridge
Controls ON\OFF Switch
Power Requirements 2 AA Batteries (2.4 V DC)
Optional Rechargeable Battery Pack BCHRBP*
Optional Battery Charger BCBC*
Dimensions (D x Dia.) 10.2" x 2.2"
Weight 14 oz.
* The Rechargeable Battery Packs should only be used with the Battery Chargers listed. Never attempt to
recharge alkaline batteries.
10

Bogen Enhancer Specifications

General

Brand	Bogen
Model	Enhancer
Category	Microphone system
Language	English