Bogen Enhancer User Manual

8
BCHM Headset Microphone
Operation
a.The BCHM is provided with a 3.5mm Locking
Connector (1) for connecting the headest to the
BCWBT Transmitter.After disconnecting the Lavaliere
Microphone from the BCWBT Transmitter, plug in the
Headset’s connector.To secure the connection, turn the
metal slip ring on the connector clockwise to thread it
on the jack.To unplug, reverse the process.
b.Wear Headset (2) so that it wraps around the back of
the head.The curved earpieces will fit over the ears.
c.While wearing the Headset, adjust the Boom Arm (3)
so that the Microphone (4) is about two inches from
your mouth. Do not place the microphone too close to
the mouth.
(Note: Observe care in selecting volume, transmitter location
and speaker placement so that acoustic feedback [howling
and screeching] will be avoided.)
4
3
2
1

Bogen Enhancer Specifications

General

Brand	Bogen
Model	Enhancer
Category	Microphone system
Language	English