Bogen MULTICOM 2000 User Manual

The MCPB Control Panel is used with Multicom 2000/Multi-Graphic Series 2233 Systems. It provides
push-button selection of two microphones and one auxiliary program source, a (“B”) program channel
(with level control), and a monitor capability which permits listening to the “A” or “B” program over
the monitor speaker of the MCP35A. For detailed information on the MCPB panel, refer to Bogen
Publication No. 54-5875-xx.
9
The MCP35A Master Control Panel is used in Multicom 2000/Multi-Graphic Series 2223 & 2233 Systems.
It provides push-button selection of two microphones and one auxiliary program source, an additional
(“A”) program channel (with level control), an intercom channel, monitoring capability, and emergency
call capability. For detailed information on the MCP35A, refer to Bogen Publication No. 54-5871-xx.
MCP35A Control Panel
PROGRAM DISTRIBUTION
INTERCOM
MONITOR-
LISTEN
PROGRAM
N P O
PRESS TO TALK
RELEASE TO LISTEN
PROGRAM/
TALK LEVEL
MIC 1 MIC 2 AUX
ALL
ROOMS
CONSOLE MIC
EMERGENCY PAGE
Switchbank
SBA225
The SBA225 Switchbank is used in Multicom 2000/Multi-Graphic 2223 System, respectively. The MCRM relay
modules connect directly to the switchbanks and provide the interface between a Multi-Graphic and a Multicom
2000 System. The SBA225 has 25 3-position lever-action switches to select the “A” program channel, Intercom
channel, or Off.
Note: The 25th switch on each switchbank is reserved for Multi-Graphic use.
Figure 4 - MCP35A
Figure 6 - Switchbank

Bogen MULTICOM 2000 Specifications

General

Brand	Bogen
Model	MULTICOM 2000
Category	PBX
Language	English