5
The following buttons are available at the top of all pages in the application.
Temperature Provides a snapshot of the amplifier module’s temperature
in
degrees Celsius during any transition (that is, change
state) on the Channel 1, Channel 2, or Protection Status
indicators.
Note: The ASB’s UI di
splays the temperature reading from
the latest update; it does not receive or display continuous
real-time amplifier module temperature readings.
Volume Sets the volume for the speaker during an intercom call or
pa
ge. This is a temporary adjustment that allows the user
to experiment with the loudness of the speaker. To make
permanent adjustments, change the various cut level set
-
tings on the Nyquist System Controller.
The value can be adjusted between -42 dB and 0 dB.
Table 3. Appliance Dashboard Buttons
Dashboard Displays the d
ashboard.
Configuration Settings Accesses the Configuration Settings page where you can
vi
ew and set various options or select to receive config-
uration settings from a
Nyquist server.
Network Settings Accesses the Network Settings page where you can view
an
d set network settings, such as the static IP address.
Firmware Update Accesses the Firmware Update page where you can view
the current Nyquist version, update firmware to a new
version, restore the configuration to factory settings,
and reboot the appliance.
Logs Accesses log files, which record either events or mes-
sages that occur when software runs and are used when
troubleshooting the appliance.
Help Accesses the appliance’s online help.
Manual Displays the ap
pliance’s configuration manual.
Logout Logs out of the appliance’s dashboard.
Table 2. ASB Status Indicators (Continued)
To Next Page
Loading...
Need help?
General