Technical information
AWE – 6721835317 (2021/09)
32
11.3.5 Alternative installation of 3-way diverter valve
Fig. 35 Alternative installation of 3-way diverter valve
[1] Motor for 3-way diverter valve, can be set for S1/S2
[2] This type of 3-way diverter valve requires a 2-pin relay (not
included in the scope of delivery)
11.3.6 Measurements from temperature sensors
CAUTION
Physical injury or material damage due to incorrect temperature
If sensors with incorrect characteristics are used, the temperatures may
be too high or too low.
▶ Make sure that the temperature sensors used comply with the
specified values (see tables below).
Table 10 Sensor T0, TC0, TC1
Table 11 Sensor TW1
Table 12 Sensor T1
°C °C °C °C
20 12488 40 5331 60 2490 80 1256
25 10001 45 4327 65 2084 85 1070
30 8060 50 3605 70 1753 90 915
35 6536 55 2989 75 1480 - -
°C °C °C °C
20 14772 40 6653 60 3243 80 1704
25 11981 45 5523 65 2744 85 1464
30 9786 50 4608 70 2332 90 1262
35 8047 55 3856 75 1990 - -
°C °C °C
– 40 154300 5 11900 50 1696
– 35 111700 10 9330 55 1405
– 30 81700 15 7370 60 1170
– 25 60400 20 5870 65 980
– 20 45100 25 4700 70 824
– 15 33950 30 3790 75 696
– 10 25800 35 3070 80 590
– 5 19770 40 2510 85 503
0 15280 45 2055 90 430
°C °C °C
To Next Page
Loading...
Need help?
General