Product description
5
AWE – 6721835317 (2021/09)
3 Product description
3.1 Supplied parts
Fig. 2 Supplied parts
[1] Indoor unit
[2] Documentation
[3] Drill template
[4] Cable feeds
[5] Particle filter with strainer
[6] Jumpers for 1-phase installation (not used in Sweden)
[7] Mounting rail
[8] Flow temperature sensor
[9] Box with terminals for the installation module
[10] DHW temperature sensor
[11] Bag with screws
[12] Outdoor sensor
3.2 Information on the indoor unit
The indoor units AWE are intended for assembly in a house and for
connection to Compress 7001i AW/Compress 7400i AW heat pumps
installed outdoors.
Possible combinations:
Table 5 Possible combinations
3.3 Declaration of conformity
The design and operating characteristics of this product comply with the
European and national requirements.
The CE marking declares that the product complies with all the
applicable EU legislation, which is stipulated by attaching this
marking.
The complete text of the Declaration of Conformity is available on the
Internet: worcester-bosch.co.uk.
1
2
3
4
5
6
12
11
10
7
8
9
AWE Compress 7001i AW/Compress
7400i AW
5-9 5
5-9 7
5-9 9
13-17 13
13-17 17
To Next Page
Loading...
Need help?
General