-7-
Disassembling the laser will
void all warranties on the
product. Do not modify the
product in any way. Modifying
the measuring tool may result
in hazardous laser radiation
exposure.
Electrical safety
Batteries can explode or leak,
cause injury or fire. To reduce
this risk, always follow all
instructions and warnings on
the battery label and package.
DO NOT short any battery
terminals.
DO NOT charge alkaline
batteries.
DO NOT mix old and new
batteries. Replace all of them
at the same time with new
batteries of the same brand
and type.
DO NOT mix battery
chemistries.
Dispose of or recycle batteries
per local code.
DO NOT dispose of batteries
in fire.
Keep batteries out of reach of
children.
Remove batteries if the device
will not be used for several
months.
The measuring tool is intended for measuring distances,
lengths, heights and clearances. The measuring tool is suitable
for measuring only indoors.
Intended Use
Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 On/Off (Hold button)
2 Display
3 Battery lid
4 Latch of battery lid
5 Serial number
6 Laser warning label
7 Reception lens
8 Laser beam outlet
9 Hand strap *
* Optional accessory
Display Elements
a Battery low indicator
b Temperature warning
c Laser switched on
d Measurement hold
e Previous measuring value
f Unit of measure
g Current measuring value
To Next Page
Loading...
Need help?
General
